Skip to the page
Black Friday: 34% off when you support Poxture App. Code BLACKFRIDAY, until 30 Nov, 11:59 pm India time. See pricing

Part of the desk setup checklist.

How to choose a monitor for office work that fits your desk

The new monitor feels great for an hour. By afternoon your chin is up to see the top of the screen, or you're leaning in to read the small text.

The short answer: measure your height and your reach at home. In the shop, check the stand puts the top of the screen at your eye level and the screen tilts. Then check you see both edges without turning your head, and read the text sitting back.

5 ft 9 in
4 ft 10 in6 ft 8 in
Shoes on
Units

Your numbers come from our desk height calculator.

Height with stand:
the product page's lowest and highest height of the monitor, from the desk to its top edge.
Depth with stand:
the monitor and its stand measured front to back, the room its foot takes on your desk.
VESA:
four screw holes on the back in a standard square, written like "100 × 100". A monitor arm that lists the same size and holds the monitor's weight fits.
Screen size:
measured corner to corner, so it is more than the screen's width. Use the width in the product's sizes.
Matte (anti-glare) or glossy:
a matte screen blurs reflections; a glossy one shows them like a mirror.

Measure at home before you go

Check in the shop or on the product page

Each line is a measurement or a test that takes about 30 seconds.

One note for glasses: with bifocals or progressives, set the screen a little lower than your number and tilt it back a little more.2,4

One note before you pay: check the return window. You can't read text or see glare from your window on a product page, so try it at your desk in the first days.

Walk away if you see this

  • At its highest, the top of the screen stays below 22 in, there are no VESA holes, and you won't put a riser under its foot.2,3
  • At its lowest, the top of the screen is above your eyes, and there are no VESA holes. A screen too high bothers you more than one a little too low.2,4
  • The screen doesn't tilt, and there are no VESA holes for an arm.3
  • From arm's length, you have to turn your head to see the edges, and your desk can't put it farther away.4,5
  • The foot doesn't fit in front of the back edge or the wall, and you won't add a monitor arm.2

Questions

What should I look for in a monitor for office work?

A stand that puts the top of the screen at or a little below your eyes, or VESA holes for a monitor arm. A screen that tilts. A size you can see edge to edge from arm's length without turning your head, and text you can read sitting back.2,3,5

What size monitor do I need for my desk distance?

One you can see edge to edge from arm's length without turning your head. Measure your reach at your desk, then mark the screen's width on a wall and test it there. A wide screen may need to sit farther away.4,5

Do I need a monitor arm?

Not if the monitor's own stand puts the top of the screen at your eye level and tilts. An arm helps when the stand can't reach, or your desk is too shallow for its depth with stand. Check for VESA holes before you buy.2

Should I get a matte or a glossy screen?

It depends on your room. Show a dark picture and look for lights or a window in it. If the screen has to face a window, a matte screen is the better fit. A window behind the screen needs a blind or curtain either way.2,5

With the screen at eye level, small text can still pull you in. Poxture App, my Mac app, checks your posture and reminds you when you get too close.