# How to choose a monitor for office work that fits your desk

> How to choose a monitor for office work: a stand that reaches your eye level, a size for your desk, glare and text checks, and when to walk away.

Canonical: https://poxture.com/guides/how-to-choose-a-monitor
Last updated: 2026-11-11

Part of the [desk setup checklist](https://poxture.com/guides/desk-setup-checklist).

The new monitor feels great for an hour. By afternoon your chin is up to see the top of the screen, or you're leaning in to read the small text.

The short answer: measure your height and your reach at home. In the shop, check the stand puts the top of the screen at your eye level and the screen tilts. Then check you see both edges without turning your head, and read the text sitting back.

Your height 5 ft 9 in

4 ft 10 in 6 ft 8 in

Shoes on

Yes No

Units

ft & in cm

Your numbers come from our [desk height calculator](https://poxture.com/desk-height-calculator).

Height with stand:

the product page's lowest and highest height of the monitor, from the desk to its top edge.

Depth with stand:

the monitor and its stand measured front to back, the room its foot takes on your desk.

VESA:

four screw holes on the back in a standard square, written like "100 × 100". A monitor arm that lists the same size and holds the monitor's weight fits.

Screen size:

measured corner to corner, so it is more than the screen's width. Use the width in the product's sizes.

Matte (anti-glare) or glossy:

a matte screen blurs reflections; a glossy one shows them like a mirror.

Print this list

## Measure at home before you go

- Your height → the top of your screen: 22 in above the desk. How: stand barefoot against a wall, mark the top of your head, measure floor to mark. Enter it above with "Shoes on" if you work in shoes. That puts the top of your screen at 47–49.5 in from the floor when you sit, 63.5–65 in when you stand, and 22 in above a desk at your desk height.[1,2]
- Your reach → where the screen goes. How: sit back in your chair at your desk, keyboard where you type. Raise one arm straight ahead. Your fingertips mark where the screen goes, about 20–30 in from your eyes. Measure from the desk's front edge to your fingertips, then from there to the back edge or the wall. The second number is the room left for the monitor's depth with stand.[5]
- Your window → where the light comes from. How: sit where you'll work and look where the screen will go. Note whether a window will be behind the screen, behind you, or to one side.[2,5]
- Your glasses. How: if you wear bifocals or progressives, note it. Your screen goes a little lower than your number.[2,4]

## Check in the shop or on the product page

Each line is a measurement or a test that takes about 30 seconds.

- The stand reaches 22 in above the desk, or it has VESA holes for an arm. Check: your number is between the lowest and highest "height with stand", or within 2 cm (1 in) of it. In the shop, measure from the desk to the top edge of the screen at the stand's lowest and highest settings. If it falls short at its highest, a monitor riser, a sturdy block made to lift a screen, can lift it. Or look for "VESA" and a size such as "100 × 100" in the product's sizes: an arm then lets you set the height and distance.[2,3]
- With the top of the screen at your number above the desk, your eyes line up with it. Check: sit with your elbows level with the shop desk, and look straight ahead. Your eyes are level with the top edge of the screen or a little above it. You don't lift your chin.[2,4]
- The screen tilts back. Check: tilt it back until the screen faces your eyes square on. OSHA says that usually takes no more than 10 to 20 degrees. On a product page, look for "tilt" with a range in degrees.[2,3]
- You see both edges from arm's length. Check: sit back with your arm straight out, fingertips on the screen. You see the left and right edges without turning your head. Online: take the screen's width from its sizes, mark it on a wall with tape, and sit back at arm's length from it to test it.[4,5]
- The foot fits on your desk. Check: the "depth with stand" is less than the room you measured behind your fingertips. If it isn't, plan a monitor arm, or check [what size desk you need](https://poxture.com/guides/how-to-choose-a-desk).[2]
- You read normal text sitting back. Check: open a page of normal text and sit back at arm's length. You read it without leaning in. If you need the text bigger, make it bigger and check your work still fits on the screen. Leaning in to read is how [sitting too close to the screen](https://poxture.com/guides/too-close) starts.[2,4,5]
- You don't see lights or a window in it. Check: show a dark picture and look for the shop's lights or your own reflection. At home, place the screen side-on to the window. If the screen has to face a window, a matte screen is the better fit for your room. A window behind the screen needs a blind or curtain, whatever the screen.[2,5]

One note for glasses: with bifocals or progressives, set the screen a little lower than your number and tilt it back a little more.[2,4]

One note before you pay: check the return window. You can't read text or see glare from your window on a product page, so try it at your desk in the first days.

## Walk away if you see this

- At its highest, the top of the screen stays below 22 in, there are no VESA holes, and you won't put a riser under its foot.[2,3]
- At its lowest, the top of the screen is above your eyes, and there are no VESA holes. A screen too high bothers you more than one a little too low.[2,4]
- The screen doesn't tilt, and there are no VESA holes for an arm.[3]
- From arm's length, you have to turn your head to see the edges, and your desk can't put it farther away.[4,5]
- The foot doesn't fit in front of the back edge or the wall, and you won't add a monitor arm.[2]

## Questions

### What should I look for in a monitor for office work?

A stand that puts the top of the screen at or a little below your eyes, or VESA holes for a monitor arm. A screen that tilts. A size you can see edge to edge from arm's length without turning your head, and text you can read sitting back.[2,3,5]

### What size monitor do I need for my desk distance?

One you can see edge to edge from arm's length without turning your head. Measure your reach at your desk, then mark the screen's width on a wall and test it there. A wide screen may need to sit farther away.[4,5]

### Do I need a monitor arm?

Not if the monitor's own stand puts the top of the screen at your eye level and tilts. An arm helps when the stand can't reach, or your desk is too shallow for its depth with stand. Check for VESA holes before you buy.[2]

### Should I get a matte or a glossy screen?

It depends on your room. Show a dark picture and look for lights or a window in it. If the screen has to face a window, a matte screen is the better fit. A window behind the screen needs a blind or curtain either way.[2,5]

With the screen at eye level, small text can still pull you in. Poxture App, my Mac app, checks your posture and reminds you when you get too close.

## Sources

1. [ANSUR II, US Army anthropometric survey (2012).](https://www.openlab.psu.edu/datasets/ansur2/)
2. [OSHA, Computer Workstations eTool: Monitors.](https://www.osha.gov/etools/computer-workstations/components/monitors)
3. [OSHA, Computer Workstations eTool: Purchasing Guide.](https://www.osha.gov/etools/computer-workstations/checklists/purchasing-guide)
4. [CCOHS, Positioning the Monitor.](https://www.ccohs.ca/oshanswers/ergonomics/office/monitor_positioning.html)
5. [Cornell University Ergonomics Web, Ergonomic Guidelines for arranging a Computer Workstation.](https://ergo.human.cornell.edu/ergoguide.html)

## Related

- [desk setup checklist](https://poxture.com/guides/desk-setup-checklist)
- [desk height calculator](https://poxture.com/desk-height-calculator)
- [what size desk you need](https://poxture.com/guides/how-to-choose-a-desk)
- [sitting too close to the screen](https://poxture.com/guides/too-close)
